Electricity: waiting for free path?

Home Forums General Discussion Electricity: waiting for free path?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #4574

    Hello there.

    I made a double track line with standard crossing and proper signals. I had old mechanic signals and I electrified my line. Then when the train reached the other side of the line, it says “Waiting for free path”, even there’s only one train using the line.

    It’s not a missing electified part as if I remove electricity on the line, it says just “no path”. It just wait for something to come and I can’t find what.

    Thank you for your help.

    Kind regards.


    Are your signals all set up correctly? One-way signals can sometimes block a train from going where it needs to go, even if there is only one train on it.


    I had the same problem, on the end was only a very very very small electified part missing.


    Exactly, same issue… I demolished my  track and made a High Speed one anyway so it’s solved 😉

    It’s not like I’m missing money 😉

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘General Discussion’ is closed to new topics and replies.