HOWTO: Split doubletrack to separate platforms.

Home Forums General Discussion HOWTO: Split doubletrack to separate platforms.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #8947
    pjk
    Participant

    As you can see  — same line, different platforms

    Interchange in the middle

    Entering/Exit

    #8961
    Foche
    Participant

    yeah but with a loop , it’s way harder to make this happen

    the useless expensive solution but working perfectly : make a 4 track circuit with 4 lines ! :

    but in case of a 2 track circuit  :
    with opposite direction for each couple of platform:

    with same direction for each couple of plaftorm  :


    as you can see , the station in the right is doing exactly what i want , but the station in the left keep using 1 platform for the “blue / yellow” line

    it’s really anoying , you need to have exactly the same track lenght for each stations , and of course , the same speed limit , if not , the game use the same station , even if there is a train already waiting

    and sometime , game reset the station , even if you replace a track , pouf , everything is broken

     

    • This reply was modified 6 years, 10 months ago by Foche.
    #8967
    pjk
    Participant

    Yeap. Exact platform selection needed badly. And also signals can and must be used as waypoints.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘General Discussion’ is closed to new topics and replies.