some simple signals / crosses

Home Forums General Discussion some simple signals / crosses

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #5140

    Heres a little Cross setup with all signals turned to one direction ones to get best results;

    1st: A cross where all trains can pass in every diection, while only 1 Train can be in the cross at once:

    2nd: A Cross where railway can cross effetive:


    Hope that this is helpful for someone :).

    Please give me feedback, cause i just tryout everything as well and may there are better way to do things…




    You should remove the signals that are last passed when they go out as it will make your cross less effectice as trains will then stop inside the cross and make it occupied by all other trains 😉


    They are there to make sure trains can only use the way for they direction. If a train has to stop there, it should be allready out of the cross, but sure, those signals could be more far away of that place 🙂


    But thanks for first feedback!

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘General Discussion’ is closed to new topics and replies.