Spiel ruckelt und stockt

Home Forums Support Spiel ruckelt und stockt

Tagged: 

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #7011
    Heisenberch zockt
    Participant

    Ich liebe Train fever eigentlich jetzt schon, aber leider ist es bei mir nicht wirklich spielbar.

    Ich wollte eigentlich auch ein Let`s Play dazu machen, aber das geht gleich gar nicht mit dieser Performance.

    Mit meinem System kann ich auch sehr Hardware-lastige Spiele zocken, normalerweise.

    i7 370, Gforce 660Ti, 16GB Ram, Win7 64bit

    Aber dennoch ruckelt das Spiel bei mir ohne Ende, auch auf niedrigen Einstellungen und mit Geometrie down.

    Wirklich unspielbar wird es bei mir aber durch diese Freezes, da bleibt in regelmässigen Abständen das Bild stehen. Man kann so schlicht keine Gleise verlegen.

    Hat jemand einen Tipp was ich machen kann, oder muss ich da auf einen Patch warten??

    #7131
    Emeg
    Participant

    That’s curious. I have nearly the same system as you have, i7 370, Gforce 660, 16 GB Ram, Win8 64bit and TF is running smooth on my system. Only some short and light jerky performance when the game is auto saving or the game presents the (monthly) financial results. Do you have the most recent video card driver software installed or may-be other software (having conflicts with TF) running at the background?  The Train Fever software don’t work properly together with some other programs. I have (beside the known McAfee troubles) also an issue between Bandicam and Train Fever. If I start the Bandicam recording program before I start Train Fewer then the landscape generator creates corrupted map results (see the picture below) Sorry for my answer in English, I am Dutch and can understand and read the German language very well, only to write in German is difficult (very unfamiliar) for me.

    #7272
    Heisenberch zockt
    Participant

    Thanks Emeg, no problem with the language.

    Me english is bad, that`s why I wrote in german… ^^

     

    First; yes, the Gforce-Driver are actual.

    And as far as I know I haven`t not too many other programms in the back.

    I also tryed to play directly after a restart of the PC, with same bad result.

    And there is no Bandicam or something else, cause I first need to be able to play the game, before I can start recording it. ^^

    But thanks, I will try it next time with stopping EVERYTHING in the back, so I will see.

    #7712
    Darkcutter
    Participant

    Hi, dasselbe Problem bei mir – aufm PC rucktelts und stockt ziemlich genau alle 2sec, je länger man spielt desto länger werden diese Ruckler bzw. Standbilder – bauen ist unmöglich. Es wird auch nicht besser wenn man auf 1024×768 ohne Details spielt..

    Mein System:
    Intel i5  760 2,8Ghz
    12GB RAM
    ATI Radeon HD 6950

    also müsste es top laufen egtl.

    Treiber hab ich alle geupdated.

    Aufm Laptop (Core i5, 4GB RAM, Mobility Radeon 5850) läufts ohne Probleme in jeder Auflösung.

    Gibts nachweislich irgendwelche Programme die Trainfever nicht mag?

    Hab eigentlich alles ausgemacht – das ATI Programm bzw. der Logitech Gaming Desktop wirds wohl nicht sein oder?

    • This reply was modified 6 years, 4 months ago by Darkcutter.
    #7716
    Darkcutter
    Participant

    aja – noch vergessen – ein Spiel laden oder neues Spiel erstellen dauert auch ne halbe Ewigkeit (mind. 5min) bis man auf die Landkarte kommt.

    Habe nun alle Programme beendet – Problem besteht noch immer.
    Liegts an Steam? 😉 hoffe nicht *g*

    • This reply was modified 6 years, 4 months ago by Darkcutter.
    #7721
    mikael
    Member

    If you set the Textures quality to high in the settings, does this change something?

    #7722
    Darkcutter
    Participant

    http://s7.directupload.net/images/140912/qq9jxy23.jpg

    fyi 🙂

     

    for me – no – do you need my descripton of the problem in English?

    #8024
    Darkcutter
    Participant

    anyone an idea for that problem? thx 🙂

    • This reply was modified 6 years, 4 months ago by Darkcutter.
    #9409
    Darkcutter
    Participant

    up – same problem after the new patch 🙁

    #9461
    SFG
    Participant

    Switching Video Settings between low or max doesnt change anything the game still got a few seconds whenever buildings are build by the Computer or building anything else like streets. The same when bulldozing something i just giot up to 7 sec breaks till the game goes on.

    The prformance is still ok when i do nothing then the breaks are onlx up to 2-3 seconds 🙂

    #9524
    yid
    Participant

    Same for me. Someone posted that the game seems to clear the graphic card´s RAM (maybe some kind of garbage collection?), even on cards with more than 1GB.  Maybe there is an easy way to fix the problem for cards with more than 1GB (like mine) in another patch.

    This could also mean that running the game on the HD4000 on an i7 CPU might not encounter the “hanging” problem, though the game is slower from the start. Can anybody prove that? (I
    ve got an AMD cpu and cannot test it, unfortunaltely)

    #9590
    humanstew
    Participant

    I noticed Windows Error Reporting running. After disabling it I had no more freezing.

    #9639
    yid
    Participant

    How can I switch off Windows Error Reporting?

    #11398
    Horsepornuser
    Participant

    http://pcsupport.about.com/od/windows7/ht/disable-error-reporting-windows-7.htm

    edit: sry wrong language;

    turning off error report doesnt solve anything. at least not on my system. guess its waiting for the next patch

    • This reply was modified 6 years, 3 months ago by Horsepornuser.
Viewing 14 posts - 1 through 14 (of 14 total)
  • The forum ‘Support’ is closed to new topics and replies.