Change track of the train – Train Fever /forums/topic/change-track-of-the-train/feed/ Wed, 30 Apr 2025 12:44:35 +0000 https://bbpress.org/?v=2.6.13 en-US /forums/topic/change-track-of-the-train/#post-13233 <![CDATA[Change track of the train]]> /forums/topic/change-track-of-the-train/#post-13233 Wed, 12 Nov 2014 10:49:47 +0000 Max AGC hi,

Here is my problem. On the same route, I have two types of trains. One that stops everywhere and a direct train (blue line). For direct train, there is a special lane (fast lane) that has no platform tracks. But when I create the link, it does not pass my train by ย fast track.

How can I do to change the route of the train?

 

PS: sorry for my bad english ….

]]> /forums/topic/change-track-of-the-train/#post-13236 <![CDATA[Reply To: Change track of the train]]> /forums/topic/change-track-of-the-train/#post-13236 Wed, 12 Nov 2014 10:55:08 +0000 FX2K You can try this, I had success with it in the past but results will vary
Place a signal (or one in both directions) where the blue line is and set it/them to one way.. or toggle them on off multiple times.. this will force the route to recalculate.

The line layout should change… toggle some more and it may change again.
If you can get it right so the signals are both two way, bulldoze them again.

Here is a post / screenshots where I had a similar issue and this solved it.

Waypoints desperately needed

]]> /forums/topic/change-track-of-the-train/#post-13237 <![CDATA[Reply To: Change track of the train]]> /forums/topic/change-track-of-the-train/#post-13237 Wed, 12 Nov 2014 11:11:02 +0000 Max AGC Awesome! Thank you very much!

]]> /forums/topic/change-track-of-the-train/#post-13245 <![CDATA[Reply To: Change track of the train]]> /forums/topic/change-track-of-the-train/#post-13245 Wed, 12 Nov 2014 12:30:30 +0000 matrix or you can use waypoints in the latest version ๐Ÿ™‚

]]> /forums/topic/change-track-of-the-train/#post-13249 <![CDATA[Reply To: Change track of the train]]> /forums/topic/change-track-of-the-train/#post-13249 Wed, 12 Nov 2014 15:03:37 +0000 FX2K

or you can use waypoints in the latest version ๐Ÿ™‚

That too, now anyway ย ๐Ÿ˜€

]]> /forums/topic/change-track-of-the-train/#post-13304 <![CDATA[Reply To: Change track of the train]]> /forums/topic/change-track-of-the-train/#post-13304 Thu, 13 Nov 2014 11:47:47 +0000 Max AGC Yeah I seee that ! Good new !

]]> /forums/topic/change-track-of-the-train/#post-13413 <![CDATA[Reply To: Change track of the train]]> /forums/topic/change-track-of-the-train/#post-13413 Sun, 16 Nov 2014 00:38:54 +0000 NeighborKid Way points are kinda broken. When I created my 10 track station. I had of course multiple lines going through a couple of tracks. The lines would switch after I adjusted them with the waypoint all by them selves. I’ve even had trains running entirely on the wrong track which the line wasnt even marking as the direction. Anyone else have this problem?

]]>