[Bug/Flaw]Blockaded intersection Login | Register | Lost your password? Home › Forums › Support › [Bug/Flaw]Blockaded intersection Tagged: Bug, flaw This topic has 2 replies, 2 voices, and was last updated 6 years, 10 months ago by Skullair. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts August 20, 2015 at 00:32 #19310 SkullairParticipant I encounter this very annoying flaw from time to time: Everything is blockaded, none of the trams will proceed, but neither do the cars or pedestrians, which could walk/drive their way without issues. They block the crossing to each other, which results a traffic jam, which wont solve itself, resulting a massive minus to the income. This problem often apears, if you have tram lines with many trams on it. It also hapens to normal sized tram lines, but less often. Please fix this This topic was modified 6 years, 10 months ago by Skullair. August 20, 2015 at 10:16 #19315 Norfolk_ChrisParticipant I find that you can avoid this problem by not using tram/bus stations, they serve no useful purpose and just cause problems. Use simple stops instead, they work perfectly well in all situations. A simple rule is restrict each stop to serve no more than three lines only you should be OK. August 27, 2015 at 16:37 #19342 SkullairParticipant Sometimes it gets stuck even when you use normal stations. This really should be fixed Author Posts Viewing 3 posts - 1 through 3 (of 3 total) The forum ‘Support’ is closed to new topics and replies.